Single Axle Extendible Tail Hoist

  • No CDL Required, on some models reducing total cost of operation
  • Short wheel base enables it to fit in tight areas
  • No F.E.T.  keeping your cost per haul down
  • Low load angle without losing your dump angle
  • 50 degree dump angle
  • Fast cycle time keeps drivers on the road

Outboard Supported Lift Brackets

Lift brackets increase stability when hoist is in the up position.

Low Loading Angle

Low Load Angle and compact size make it great for parking garages and carrying and unloading heavy equipment.

Pintle Hook

Optional Pintle Hooks make the hoist even more versatile.

Outside Control Valve

Controls are easy access and makes maintenance very accessible.

Standard Features

  • 8 x 4 x 3/8” Tube Main Frame
  • 4 x 3 x 3/16” Tube Sub Frame
  • All Working Points Greasable
  • 1” Spring Loaded Container Locks
  • 2 1/2” Diameter Lower Lift Cylinder Shafts
  • 10” Diameter Cable Sheaves
  • Sealed Lighting System
  • Hydraulic Reservoir
  • Hoist Up Alarm
  • Back Up Alarm
  • 5/8” Cable

Options

  • Behind Cab Tank
  • Front Mount Pump
  • PTO
  • Tool Boxes
  • Auxiliary Stops
  • Poly or Steel Fenders
  • Tarping Systems
  • Pintle Hook

Single Axle Extendible Tail Hoist Diagram

Model Rated Cap. Type CA Hoist Length Rear Hinge Diameter Main Frame Tube Upper Lift Shaft Tail Frame Tube Sub Frame Tube Recommended Container Length S
EX 20119 S048 20,000# Extendible Tail 119” 175” - 216 1/2” 2” 8” 1 1/4” 7” 2” 10’ - 14’ 128 1/2”
EX 30108 S054 20,000# Extendible Tail 108” 164” - 206 1/2” 2” 8” 2 1/2” 7” 2” 14’ - 16’ 128 1/2”
EX 30110 S054 30,000# Extendible Tail 110” 164” - 206 1/2” 2” 8” 1 1/4” 7” 2” 12’ - 14’ 128 1/2”
EX 30119 S054 30,000# Extendible Tail 119” 175” - 217” 2” 8” 1 1/4” 7” 2” 14’ - 16’ 128 1/2”
EX 30138 S054 30,000# Extendible Tail 138” 192” - 252” 2” 8” 1 1/4” 6” 4” 14’ - 16’ 160 1/2”
EX 30156 S054 30,000# Extendible Tail 156” 210” - 270” 2” 8” 1 1/4” 6” 4” 16’ - 20’ 174 1/2”
* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly. All dimensions are subject to steel and manufacturing tolerances.