Heavy Duty Outside Rail Hoist

  • 10” mainframe  and 75k capacity making it capable of handling heavy loads
  • Great for scrap applications
  • Inside controls standard reducing the chance of driver injury
  • 48 degree dump angle on all models
  • Durable rear hinge designed to withstand the stress of grueling day after day use
  • 2 minute loading cycle time* keeping your drivers on the road

Outboard Supported Side Rollers

Greasable roller shaft is removable with two bolts.

Wear Strips

Strips on top and bottom of the mainframe help prevent wear and reduce friction.

Auto Fold Bumper

Bumper folds forward reducing the chance of bending and hang-ups in the landfill.

Container Support Rails

Rails aid in loading misaligned containers and give added support the long sills increasing the life of your container.

Standard Features

  • 10" x 4" x 1/2" Tube Main Frame
  • 2 1/2" Diameter Rear Hinge
  • Pintle Ready Apron
  • Auto Fold Forward DOT bumper
  • 1" Spring Loaded Container Locks
  • 2 1/2" Diameter Lift Cylinder Shafts
  • 12" Diameter Vertical Sheave
  • 12" Sheave Blocks
  • 48 Gallon Oil Reservoir
  • Inside and Outside Controls
  • Sealed Lighting System
  • Forward & Reverse mount Lift Cylinders

Options

  • Behind Cab and oversize oil tanks
  • Tool Boxes
  • Auxiliary Stops
  • Poly or Steel Fenders
  • Tarping Systems
  • "The Hooker" Hold on System
  • Ratchet Tie Down Straps
  • Pintle Hook
  • Front Mount Pump
  • PTO
  • Drop Shaft
  • On Board Scale Systems
  • Work Lights
  • Rear View Camera Systems
 

Heavy Duty Outside Rail Hoist Diagram

Model Rated Cap. CT L Dump Angle Up (Sec.)* Down (Sec.)* On (Sec.)* Off (Sec.)* Lift Cylinder Winch Cylinder Container Length Appx. Wgt.
NOR 75174 T121 75,000# 174” 23’ 2” 48 deg. 49 20 46 37 6” - 5” - 4” x 121” DAT 7” - 3” x 81 1/2” DA 18’ to 22’ 7931#
NOR 75182 T121 75,000# 182” 23’ 10” 48 deg. 49 20 46 37 6” - 5” - 4” x 121” DAT 7” - 3” x 81 1/2” DA 18’ to 22’ 8215#
NOR 75194 T121 75,000# 194” 24’ 11” 48 deg. 49 20 50 40 6” - 5” - 4” x 121” DAT 7” - 3” x 91 1/2” DA 20’ to 24’ 8781#
* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly. All dimensions are subject to steel and manufacturing tolerances.

Bumper folds forward reducing the chance of bending and hang-ups in the landfill.

Rollers are bolted to the side of the frame, allowing for easier replacement and better support of the container.