
The Dead Lift hoist utilizes the two rear flange rollers as well as a center cable roller to pull the container straight up and winch onto the hoist frame. This hoist is best utilized in tight spaces.
- Compact and able to collect containers in tight areas
- Great for when you need the size of a single axle but need to carry the weight only a multi axle can handle
- 2 Minute total cycle time*
- 47 Degree Dump angle
Our Advantage
![]() Outboard Supported Side RollersGreasable roller shaft is removable with two bolts. |
![]() Lift CylinderTwo lift cylinders utilize a 2 ½” shaft. |
![]() Heavy Duty Rear RollersRollers increase the life of your hoist and gives you added support to the long sills of your container. |
![]() Front StopDurable stops made with heavy duty 1-½” plate steel. |
Features
Standard Features
- 8 x 4 x 1/2” Tube Main Frame
- 3 x 2 x 1/4” Tube Sub Frame
- 2 1/2” Diameter Rear Hinge
- All Working Points Greasable
- 1” Spring Loaded Container Locks
- 2 1/2” Diameter Lift Cylinder Shafts
- 10” Diameter Cable Sheaves
- 52 Gallon Oil Reservoir
- Suction Screen and Return Filter
- Inside and Outside Controls
- Sealed Lighting System
Options
- Behind Cab and Oversize Oil Tanks
- Tool Boxes
- Auxiliary Stops
- Poly or Steel Fenders
- Tarping Systems
- Hooker Hold On Systems
- Ratchet Tie Down Straps
- Pintle Hook
- Front Mount Pump
- PTO
- Drop Shaft
Product Specifications
Model | Rated Cap. | CT | L | Dump Angle | Up (Sec.)* | Down (Sec.)* | On (Sec.)* | Off (Sec.)* | Lift Cylinder | Winch Cylinder | Container Length | Appx. Wgt. |
---|---|---|---|---|---|---|---|---|---|---|---|---|
HH 50174 S074.5 | 50,000# | 174” | 19’ | 47 deg. | 30 | 13 | 46 | 37 | 6” - 4 1/2” x 74 1/2” DA | 7” - 3” x 81 1/2” DA | 18’ to 20’ | 7500# |
HH 50174 T121 | 50,000# | 174” | 19’ | 47 deg. | 43 | 10 | 46 | 37 | 6” - 5” - 4” x 121” DAT | 7” - 3” x 81 1/2” DA | 18’ to 20’ | 8300# |
HH 50194 T121 | 50,000# | 194” | 20’ - 8” | 47 deg. | 43 | 10 | 46 | 37 | 6” - 5” - 4” x 121” DAT | 7” - 3” x 91 1/2” DA | 20’ to 24’ | 8500# |