Short Extendible Tail Hoist

Outboard Supported Side Rollers

Greasable roller shaft is removable with two bolts.

Low Loading Angle

A forty inch tail provides a low loading angle and allows for a DOT/ICC fold up bumper.

Auto Fold Bumper (Hoist Down)

Bumper extends downward to normal position in the hoist down position.

Auto Fold Bumper (Hoist Up)

Bumper folds forward reducing the chance of bending and hang-ups in the landfill.

Standard Features

  • 8 x 4 x 1/2” Tube Main Frame
  • 4 x 3 x 3/16” Tube Sub Frame
  • 2 1/2” Diameter Rear Hinge
  • All Working Points Greasable
  • 1” Spring Loaded Container Locks
  • 2 1/2” Diameter Lift Cylinder Shafts
  • 10” Diameter Cable Sheaves
  • 52 Gallon Oil Reservoir
  • Suction Screen and Return Filter
  • Inside and Outside Controls
  • Sealed Lighting System

Options

  • Behind Cab and Oversize Oil Tanks
  • Tool Boxes
  • Auxiliary Stops
  • Poly or Steel Fenders
  • Tarping Systems
  • Hooker Hold On Systems
  • Ratchet Tie Down Straps
  • Pintle Hook
  • Front Mount Pump
  • PTO
  • Drop Shaft

Short Extendible Tail Hoist Diagram

Model Rated Cap. CT L Dump Angle Up (Sec.)* Down (Sec.)* On (Sec.)* Off (Sec.)* Lift Cylinder Winch Cylinder Container Length
OX 60174 S074.5 60,000# 174” 22’ 11” 48 deg. 30 13 46 37 6” - 4 1/2” x 74 1/2” DA 7” - 3” x 81 1/2” DA 18’ to 22’
OX 60174 T121 60,000# 174” 22’ 11” 48 deg. 43 10 46 37 6” - 5” - 4” x 121” DAT 7” - 3” x 81 1/2” DA 18’ to 22’
OX 60194 T121 60,000# 194” 25’ 5” 48 deg. 43 10 51 42 6” - 5” - 4” x 121” DAT 7” - 3” x 91 1/2” DA 20’ to 24’
OX 60194 T083 60,000# 194” 25’ 5” 48 deg. 30 13 46 37 5” - 4” x 83” DAT 7” - 3” x 91 1/2” DA 20’ to 24’
OX 60194 T114 60,000# 194” 25’ 5” 48 deg. 43 10 46 37 6” - 5” - 4” x 121” DAT 7” - 3” x 91 1/2” DA 20’ to 24’
OX 60229 T130 60,000# 229” 31’ 6” 46 deg. 60 24 72 59 6” - 5” - 4” x 130” DAT 7” - 3” x 91 1/2” DA 24’ to 28’
* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly. All dimensions are subject to steel and manufacturing tolerances.

Bumper folds forward reducing the chance of bending and hang-ups in the landfill.

Rollers are bolted to the side of the frame, allowing for easier replacement and better support of the container.