Inside/Outside Rail Hoist

Auto Fold Bumper

Bumper folds forward reducing the chance of bending and hang-ups in the landfill.

Side Rollers

Rollers are bolted to the side of the frame, allowing for easier replacement and better support of the container.

Container Support Rails

Rails aid in loading misaligned containers and give added to support the long sills increasing the life of your container.

Cor-Ten Divider Angle

Cor-Ten Divider Angle made from heavy duty steel to ensure it will last.

Standard Features

  • 8 x 4 x 1/2” Tube Main Frame
  • 3 x 2 x 1/4” Tube Sub Frame
  • 2 1/2” Diameter Rear Hinge
  • All Working Points Greasable
  • 1” Spring Loaded Container Locks
  • 2 1/2” Diameter Lift Cylinder Shafts
  • 10” Diameter Cable Sheaves
  • 52 Gallon Oil Reservoir
  • Suction Screen and Return Filter
  • Inside and Outside Controls
  • Sealed Lighting System

Options

  • Behind Cab and Oversize Oil Tanks
  • Tool Boxes
  • Auxiliary Stops
  • Poly or Steel Fenders
  • Tarping Systems
  • Hooker Hold On Systems
  • Ratchet Tie Down Straps
  • Pintle Hook
  • Front Mount Pump
  • PTO
  • Drop Shaft

Inside/Outside Rail Hoist Diagram

Model Rated Cap. CT L Dump Angle Up (Sec.)* Down (Sec.)* On (Sec.)* Off (Sec.)* Lift Cylinder Winch Cylinder Container Length Appx. Wgt.
IO 60174 S074.5 60,000# 174” 23’ 4” 47 deg. 30 13 46 37 6” - 4 1/2” x 74 1/2” DA 7” x 3” x 81 1/2” DA 16’ to 20’ IR 18’ to 22’ OR 7900#
IO 60174 T121 60,000# 174” 23’ 4” 47 deg. 43 10 46 37 6” - 5” - 4” x 121” DAT 7” x 3” x 81 1/2” DA 16’ to 20’ IR 18’ to 22’ OR 7900#
IO 60194 T121 60,000# 194” 25’ 0” 47 deg. 43 10 51 42 6” - 5” - 4” x 121” DAT 7” x 3” x 91 1/2” DA 20’ to 24’ 8100#
IO 75174 T121 75,000# 174” 23’ 4” 47 deg. 43 10 46 37 6” - 5” - 4” x 121” DAT 7” x 3” x 81 1/2” DA 16’ to 20’ IR 18’ to 22’ OR 8025#
IO 75194 T121 75,000# 194” 25’ 0” 47 deg. 43 10 51 42 6” - 5” - 4” x 121” DAT 7” x 3” x 91 1/2” DA 20’ to 24’ 8325#
IO 60194 T083 60,000# 194” 25’ 0” 47 deg. 29 15 46 40 6” - 5” x 83” DAT 7” x 3” x 91 1/2” DA 20’ to 24’ 7325#
IO 60194 T114 60,000# 194” 25’ 0” 47 deg. 49 20 50 40 6” - 5” - 4” x 114” DAT 7” x 3” x 91 1/2” DA 20’ to 24’ 8225#
IO 60229 T138 60,000# 229” 28’ 5” 47 deg. 60 24 72 59 6” - 5” - 4” x 138” DAT 7” x 3” x 91 1/2” DA 24’ to 28’ 9125#
IO 60182 S074.5 60,000# 182” 24’ 0” 47 deg. 43 10 46 37 6” - 4 1/2” x 74.5” DA 7” x 3” x 81 1/2” DA 16’ to 20’ IR 18’ to 22’ OR 7925#
IO 60182 T121 60,000# 182” 24’ 0” 47 deg. 43 10 46 37 6” - 5” x 4” x 121” DAT 7” x 3” x 81 1/2” DA 16’ to 20’ IR 18’ to 22’ OR 8000#
* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly.

Bumper folds forward reducing the chance of bending and hang-ups in the landfill.

Rollers are bolted to the side of the frame, allowing for easier replacement and better support of the container.

Proper loading of a container on a Galfab Multi Axle Cable Hoist. Featuring the Galfab NOR series hoist, model NOR75194T121.

Proper unloading of a container on a Galfab Multi Axle Cable Hoist. Featuring the Galfab NOR series hoist, model NOR75194T121.