Heavy Duty Extendible Tail Hoist

Outboard Supported Side Rollers

Greasable roller shaft is removable with two bolts.

Wear Strips

Strips on top and bottom of the mainframe help prevent wear and reduce friction.

Lowest Loading Angle

Low loading angle is great for areas with low overhead and loading containers with lose debris.

80” Extendible Tail

Extendible tail gives your container added support while not losing your 48 degree dump angle.

Standard Features

  • 10 x 4” Tube Main Frame
  • 2 1/2” Diameter Rear Hinge
  • All Working Points Greasable
  • 1” Spring Loaded Container Locks
  • 2 1/2” Diameter Lift Cylinder Shafts
  • 10” Diameter Vertical Front Sheave
  • 10” Diameter Horizontal Sheaves
  • 10” Diameter Sheave Blocks
  • 52 Gallon Oil Reservoir
  • Suction Screen and Return Filter
  • Inside and Outside Controls
  • Sealed Lighting System

Options

  • Behind Cab and Oversize Oil Tanks
  • Tool Boxes
  • Auxiliary Stops
  • Poly or Steel Fenders
  • Tarping Systems
  • Hooker Hold On Systems
  • Ratchet Tie Down Straps
  • Pintle Hook
  • Front Mount Pump
  • PTO
  • Drop Shaft

Heavy Duty Extendible Tail Hoist Diagram

Model Rated Cap. CT L Dump Angle Up (Sec.)* Down (Sec.)* On (Sec.)* Off (Sec.)* Lift Cylinder Winch Cylinder Container Length
NEX 60174 T121 60,000# 174” 19’ 10” 48 deg. 43 20 46 37 6” - 5” - 4” x 121” DAT 7” x 3” x 81 1/2” DA 18’ to 22’
NEX 60194 T121 60,000# 194” 22’ 4” 48 deg. 43 20 51 42 6” - 5” - 4” x 121” DAT 7” x 3” x 91 1/2” DA 20’ to 24’
NEX 60225 T152 60,000# 225” 28’ 1” 46 deg. 60 24 72 59 6” - 5” - 4” x 152” DAT 7” x 3” x 91 1/2” DA 24’ to 28’
* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly. All dimensions are subject to steel and manufacturing tolerances.

Rollers are bolted to the side of the frame, allowing for easier replacement and better support of the container.