Extendible Tail Hoist

Outboard Supported Side Rollers

Greasable roller shaft is removable with two bolts

Lowest Loading Angle

Lowest load angle in the industry with a DOT ICC bumper standard.

Optional Side Roller on Tail

Tail reduces stress on the long sills of the container.

Optional Wings on Tail

Tail is great for loading misaligned containers.

Standard Features

  • 8 x 4 x 1/2” Tube Main Frame
  • 3 x 2 x 1/4” Tube Sub Frame
  • 2 1/2” Diameter Rear Hinge
  • All Working Points Greasable
  • 1” Spring Loaded Container Locks
  • 2 1/2” Diameter Lift Cylinder Shafts
  • 10” Diameter Cable Sheaves
  • 52 Gallon Oil Reservoir
  • Suction Screen and Return Filter
  • Inside and Outside Controls
  • Sealed Lighting System

Options

  • Behind Cab and Oversize Oil Tanks
  • Tool Boxes
  • Auxiliary Stops
  • Poly or Steel Fenders
  • Tarping Systems
  • Hooker Hold On Systems
  • Ratchet Tie Down Straps
  • Pintle Hook
  • Front Mount Pump
  • PTO
  • Drop Shaft

Extendible Tail Hoist Diagram

Model Rated Cap. CT L Dump Angle Up (Sec.)* Down (Sec.)* On (Sec.)* Off (Sec.)* Lift Cylinder Winch Cylinder Container Length Appx. Wgt.
EX 60174 S074.5 60,000# 174” 19’ 10” 48 deg. 30 13 46 37 6” - 4 1/2” x 74 1/2” DA 7” x 3” x 81 1/2” DA 18’ to 22’ 8000#
EX 60174 T121 60,000# 174” 19’ 10” 48 deg. 43 10 46 37 6” - 5” - 4” x 121” DAT 7” x 3” x 81 1/2” DA 18’ to 22’ 8000#
EX 60194 T121 60,000# 194” 21’ 5” 48 deg. 43 10 51 42 6” - 5” - 4” x 121” DAT 7” x 3” x 91 1/2” DA 20’ to 24’ 8900#
EX 60194 T083 60,000# 194” 21’ 5” 48 deg. 30 13 46 37 6” - 5” x 83” DAT 7” x 3” x 91 1/2” DA 20’ to 24’ 8050#
EX 60194 T114 60,000# 194” 21’ 5” 48 deg. 43 10 46 37 6” - 4” x 114” DAT 7” x 3” x 91 1/2” DA 20’ to 24’ 8875#
EX 60229 T138 60,000# 229” 28’ 5” 46 deg. 60 24 72 59 6” - 5” - 4” x 138” DAT 7” x 3” x 91 1/2” DA 24’ to 28’ 9775#
* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly. All dimensions are subject to steel and manufacturing tolerances.

Video detailing GalFab Extended Tail Hoist features, options and production

Rollers are bolted to the side of the frame, allowing for easier replacement and better support of the container.